DataSave Online
Laboratory parameter recording, reporting and alarm monitoring system
- Continuous monitoring
- 24 hours a day, 7 days a week
- User-defined recording interval
- min1 to 99 minutes
- System components
- 10
- Touchscreen on every module
- 4.3 inches
The system
It records, reports and raises the alarm.
DataSave Online continuously monitors, records, and reports key conditions across incubators, cryogenic storage tanks, refrigerators, and essential environmental parameters such as temperature, humidity, and oxygen levels—ensuring 24/7 control and full traceability of critical data.
24/7 continuous monitoring
Keep critical laboratory data under constant supervision.
Instant emergency notifications
Take rapid action via email, SMS, app notifications, and phone calls.
Battery-backed protection
Supports system reliability during power outages.
Advanced reporting
Easily access all measurement data and generate detailed reports.
System components
Ten components, one system.
DataSave Online provides seamless wired and wireless connectivity over a unified network infrastructure, enabling effortless integration into laboratory environments.
DataSave Online system components
DSO 101
Laboratory variable management software
The DataSave Online System is an advanced monitoring and reporting software that enables the secure collection, management, and archiving of data obtained from connected modules. Data is automatically recorded at user-defined intervals ranging from 1 to 99 minutes, providing uninterrupted data monitoring.
The system allows recorded data to be viewed and analyzed retrospectively in the form of graphical or tabular reports.
Values on the module screens are examples, not measurement results.
DSO 105
Laboratory monitoring and GSM module
DSO 105 continuously monitors the connection status of all components within the DataSave Online System and serves as the main control unit that informs users in alarm scenarios.
- What it monitors
- Connection status of all components
- Contact inputs/outputs
- 4 inputs / 2 outputs
- GSM module
- SIM card support; SMS in alarm situations
Values on the module screens are examples, not measurement results.
DSO 110
Sample storage tank reference communication module
DSO 110 enables the recording of data from your frozen sample storage tanks by receiving tank data through communication ports. With an optionally addable PT100 witness/reference temperature sensor, the temperature values inside the tank can also be measured and recorded in real time.
- What it monitors
- Frozen sample storage tanks
- Connection
- Communication ports
- Input capacity
- 2 tanks
- Witness/reference sensor
- 2 units · PT100, optional
- Compatible control modules
- CHART TEC3000 and Vario
Values on the module screens are examples, not measurement results.
DSO 120
Embryo/
DSO 120 Embryo/Cell Culture Incubator Module has been developed within the DataSave Online System to monitor and record incubator temperature, CO₂, and O₂ data in real time via communication ports.
- What it monitors
- Incubator temperature, CO₂ and O₂ data
- Connection
- Communication ports
- Input capacity
- 2 incubators
- Witness/reference sensor
- 2-2 units · CO₂ and temperature, optional
Values on the module screens are examples, not measurement results.
DSO 130
Liquid nitrogen tank communication module
DSO 130 enables the monitoring and recording of data from level and pressure sensors with 4–20 mA and 0–10 V outputs installed on pressurized liquid nitrogen tanks. The obtained data can be viewed in real time and analyzed retrospectively.
- What it monitors
- Level and pressure on pressurized liquid nitrogen tanks
- Connection
- Sensors with 4–20 mA and 0–10 V outputs
- Input capacity
- 2 tanks
- Measurement feature
- 4–20 mA
- Relay outputs
- 2 units
Values on the module screens are examples, not measurement results.
DSO 140
Temperature monitor
DSO 140 measures and records temperature values inside incubators, refrigerators, and frozen sample storage tanks in real time via a PT100 temperature sensor and enables continuous monitoring.
- What it monitors
- Temperature
- Sensor
- PT100
- Channels
- 2 independent channels
- Relay outputs
- 2 units
- Alarm
- Upper and lower limits set on screen; audible and visual alarms
Values on the module screens are examples, not measurement results.
DSO 150
Oxygen/
DSO 150 measures and records oxygen (O₂), temperature, and humidity levels in the laboratory environment in real time via its integrated sensors and enables continuous monitoring.
- What it monitors
- O₂, temperature and humidity
- Sensor
- Integrated sensors
- O₂ measurement range
- 0–100%
- Temperature measurement range
- -40 °C / +80 °C
- Humidity measurement range
- 0–100%
- Relay outputs
- 2 units
- Alarm
- Two-stage O₂ alarm; temperature and humidity limits
Values on the module screens are examples, not measurement results.
DSO 153
Oxygen monitor
DSO 153 enables real-time measurement, monitoring, and recording of ambient oxygen (O₂) levels in IVF and stem cell culture laboratories. In this way, it helps users stay informed about critical O₂ fluctuations, while allowing recorded data to be reported retrospectively and ensuring full traceability.
- What it monitors
- O₂
- O₂ measurement range
- 0–100%
- Relay outputs
- 2 units
- Alarm
- Two-stage O₂ alarm
Values on the module screens are examples, not measurement results.
DSO 155
Temperature & humidity monitor
DSO 155 enables real-time measurement, monitoring, and recording of ambient temperature and humidity values in IVF and stem cell culture laboratories. In this way, it allows users to continuously track environmental conditions, while providing full traceability through retrospective reporting of recorded data.
- What it monitors
- Temperature and humidity
- Temperature measurement range
- -40 °C / +80 °C
- Humidity measurement range
- 0–100%
- Relay outputs
- 2 units
- Alarm
- Audible and visual alarms
Values on the module screens are examples, not measurement results.
DSO 160
Environmental air quality monitor
DSO 160 is a high-precision environmental monitoring device developed to monitor air quality in laboratories, cleanrooms, production areas, and other controlled environments. It continuously measures airborne particle concentrations and Volatile Organic Compound (VOC) levels in real time, enabling continuous air quality control.
The device helps identify airborne contamination risks in areas where critical processes are performed and supports environmental monitoring activities required within quality management systems.
- What it monitors
- Particles and VOC
- Particle sensor
- Laser scattering
- T-VOC sensor
- MOX-based digital gas sensing technology
- Particle sizes
- 0.3, 0.5, 1, and 5 µm
- Relay outputs
- 2 units
Alarms and notifications
Alarms reach the people who need to know.
In critical situations, the system responds instantly. Automated alerts are delivered through email, SMS, mobile notifications, and voice calls, enabling rapid awareness and immediate action when it matters most.
Notification channels
- SMS
- Mobile app notification
- Automated phone call
DSO 105
Laboratory monitoring and GSM module
SIM card support
SMS sending can be performed in alarm situations through the GSM module with SIM card support. Mobile application notifications can be delivered and automatic phone calls can be made, enabling rapid communication with relevant personnel.
Input contacts
The 4 input contacts on the device allow alarm signals from different devices with contact alarm outputs in your laboratory to be integrated into the system. All critical alarms can thus be managed from a single center.
Output contacts
The 2 output contacts operate with on/off logic in alarm scenarios, enabling external devices or warning systems to be triggered.
Alarms and outputs on the modules
DSO 130 · Liquid nitrogen tank communication module
DSO 130 has 2 relay outputs that enable solenoid valves to be triggered according to predefined scenarios. In this way, the solenoid valve on the liquid nitrogen tank’s liquid outlet line can be controlled, allowing liquid nitrogen flow to be managed and automatic filling processes to be supported.
DSO 140 · Temperature monitor
Upper and lower temperature alarm limits can be easily defined by the user via the screen interface. If the temperature goes outside the defined range, the device immediately notifies the user by providing audible and visual alarms.
DSO 150 · Oxygen/temperature/humidity monitor
The device has a two-stage O₂ alarm feature that can be configured by the user in order to keep oxygen levels within safe limits. Two contact outputs are available for first- and second-level alarm scenarios. In addition, the device generates an alarm and notifies the user if temperature and humidity values exceed the limits defined by the user.
DSO 153 · Oxygen monitor
The device has a user-configurable two-stage O₂ alarm feature to ensure oxygen levels are monitored within safe limits. Two contact outputs are available for first- and second-level alarm scenarios.
DSO 155 · Temperature & humidity monitor
In case the alarm limits defined by the user are exceeded, the device provides audible and visual alarms, helping to quickly inform relevant personnel.
DataSave Online
Technical specifications
All modules
- External dimensions
- 170 × 110 × 65 mm
- Screen
- 4.3″ capacitive touch screen
- Power
- 5 V – 1.5 A
- Battery backup
- Available
DSO 101 · Laboratory variable management software
- Recording interval
- 1–99 min, user-defined
- Reports
- Graphical or tabular, retrospective
- Alarm notifications
- Email, SMS, mobile app notifications, automated phone calls
DSO 105 · Laboratory monitoring and GSM module
- What it monitors
- Connection status of all components
- Contact inputs/outputs
- 4 inputs / 2 outputs
- GSM module
- SIM card support; SMS in alarm situations
Communication modules
| DSO 110 | DSO 120 | DSO 130 | |
|---|---|---|---|
| What it monitors | Frozen sample storage tanks | Incubator temperature, CO₂ and O₂ data | Level and pressure on pressurized liquid nitrogen tanks |
| Connection | Communication ports | Communication ports | Sensors with 4–20 mA and 0–10 V outputs |
| Input capacity | 2 tanks | 2 incubators | 2 tanks |
| Witness/reference sensor | 2 units · PT100, optional | 2-2 units · CO₂ and temperature, optional | – |
| Measurement feature | – | – | 4–20 mA |
| Compatible control modules | CHART TEC3000 and Vario | – | – |
| Relay outputs | – | – | 2 units |
DSO 110
- What it monitors
- Frozen sample storage tanks
- Connection
- Communication ports
- Input capacity
- 2 tanks
- Witness/reference sensor
- 2 units · PT100, optional
- Compatible control modules
- CHART TEC3000 and Vario
DSO 120
- What it monitors
- Incubator temperature, CO₂ and O₂ data
- Connection
- Communication ports
- Input capacity
- 2 incubators
- Witness/reference sensor
- 2-2 units · CO₂ and temperature, optional
DSO 130
- What it monitors
- Level and pressure on pressurized liquid nitrogen tanks
- Connection
- Sensors with 4–20 mA and 0–10 V outputs
- Input capacity
- 2 tanks
- Measurement feature
- 4–20 mA
- Relay outputs
- 2 units
Monitors
| DSO 140 | DSO 150 | DSO 153 | DSO 155 | |
|---|---|---|---|---|
| What it monitors | Temperature | O₂, temperature and humidity | O₂ | Temperature and humidity |
| Sensor | PT100 | Integrated sensors | – | – |
| Channels | 2 independent channels | – | – | – |
| O₂ measurement range | – | 0–100% | 0–100% | – |
| Temperature measurement range | – | -40 °C / +80 °C | – | -40 °C / +80 °C |
| Humidity measurement range | – | 0–100% | – | 0–100% |
| Relay outputs | 2 units | 2 units | 2 units | 2 units |
| Alarm | Upper and lower limits set on screen; audible and visual alarms | Two-stage O₂ alarm; temperature and humidity limits | Two-stage O₂ alarm | Audible and visual alarms |
DSO 140
- What it monitors
- Temperature
- Sensor
- PT100
- Channels
- 2 independent channels
- Relay outputs
- 2 units
- Alarm
- Upper and lower limits set on screen; audible and visual alarms
DSO 150
- What it monitors
- O₂, temperature and humidity
- Sensor
- Integrated sensors
- O₂ measurement range
- 0–100%
- Temperature measurement range
- -40 °C / +80 °C
- Humidity measurement range
- 0–100%
- Relay outputs
- 2 units
- Alarm
- Two-stage O₂ alarm; temperature and humidity limits
DSO 153
- What it monitors
- O₂
- O₂ measurement range
- 0–100%
- Relay outputs
- 2 units
- Alarm
- Two-stage O₂ alarm
DSO 155
- What it monitors
- Temperature and humidity
- Temperature measurement range
- -40 °C / +80 °C
- Humidity measurement range
- 0–100%
- Relay outputs
- 2 units
- Alarm
- Audible and visual alarms
DSO 160 · Environmental air quality monitor
- What it monitors
- Particles and VOC
- Relay outputs
- 2 units
DSO 160 sensors
| Particle | T-VOC | |
|---|---|---|
| Sensor feature | Laser scattering | MOX-based digital gas sensing technology |
| Air quality classification | ISO CLASS-5, ISO CLASS-6, ISO CLASS-7, ISO CLASS-8, ISO CLASS-9 | 1 (Excellent), 2 (Good), 3 (Moderate), 4 (Poor), 5 (Unhealthy) |
| Units | Particles/m³ – Particles/L | ppm – ppb |
| Particle sizes | 0.3 µm, 0.5 µm, 1 µm, 5 µm | – |
Particle
- Sensor feature
- Laser scattering
- Air quality classification
- ISO CLASS-5, ISO CLASS-6, ISO CLASS-7, ISO CLASS-8, ISO CLASS-9
- Units
- Particles/m³ – Particles/L
- Particle sizes
- 0.3 µm, 0.5 µm, 1 µm, 5 µm
T-VOC
- Sensor feature
- MOX-based digital gas sensing technology
- Air quality classification
- 1 (Excellent), 2 (Good), 3 (Moderate), 4 (Poor), 5 (Unhealthy)
- Units
- ppm – ppb
Get a quote for DataSave Online.
On the quote form, the subject is pre-filled for DataSave Online.