PHP 50
Holds samples at 37°C with ±0.3°C accuracy.
BTH 20
Block tube heater
Heats follicular fluids and oocytes in test tubes up to 37°C and maintains a stable temperature at 37°C.
- Temperature accuracy
- ±0.2°C
- Block capacity
- 2blocks
- Room temperature to 37°C
- < 30min
- Color TFT touchscreen
- 3.2-inch
Two-dimensional heating
Not only from below, but from the sides.
Using a heating film resistor, the BTH 20 warms the block chamber not only from the bottom surface but also from the side walls, ensuring safe and homogeneous heat distribution.
Designed for use in OPU operating rooms and embryology laboratories.
Schematic cross-section: the block chamber is heated from the bottom surface and both side walls; a block holding test tubes sits in the chamber.
- Heated surfaces: bottom and side walls
- Block and test tubes
Schematic cross-section, not to scale.
Compatible blocks
A block for each tube size.
Compatible aluminum blocks for block tube heaters. The block capacity of the BTH 20 is 2 blocks.
WB-06
For 5 mL test tubes
- Capacity
- 12tubes
- Diameter
- Ø12 mm
- Compatible tubes
- Falcon 352003
- Structure
- Rectangular prism
WB-08
For 14 mL test tubes
- Capacity
- 10tubes
- Diameter
- Ø17 mm
- Compatible tubes
- Falcon 352001
- Structure
- Rectangular prism
Operation
Alerts when time is up, shows the overrun.
Automatic start-up
The user-friendly BTH 20 control panel is equipped with a timer function for automatic operation. It ensures the device is ready at the desired temperature when you enter the laboratory.
Timer
Initiates a timer for sperm analysis and other time-dependent procedures without requiring an external device, providing both audible and visual alerts once the set time has elapsed. If the defined duration is exceeded, the elapsed time is displayed on the screen.
Safety and ease of use
The BTH 20 block tube heater with an integrated control panel operates at low voltage, ensuring user safety. Its 3.2″ resistive color TFT touchscreen provides easy operation and can be conveniently used while wearing gloves. It is resistant to liquid spill risks.
Fast heating and data transfer
Thanks to its high thermal conductivity aluminum structure, it reaches 37°C from room temperature in less than 30 minutes. Real-time temperature data can be transferred to a computer using the cable supplied with the device.
BTH 20
Technical specifications
Heating
- Block capacity
- 2 blocks
- Temperature accuracy
- ±0.2 °C
- Temperature resolution
- 0.1 °C
- Control system
- PID control
- Sensor type
- PT100 Class A
Power
- Power input
- 19 V, 4.5 A
- Maximum power
- 40 watt
- Nominal power
- 25 watt
Size and weight
- External dimensions (W × D × H)
- 260 × 280 × 100 mm
- Weight (including power adapter)
- 4 kg
Display and data
- Screen
- 3.2″ color TFT touchscreen
- Data output
- Type-C
Compatible blocks
| WB-06 | WB-08 | |
|---|---|---|
| Test tubes | 5 mL test tubes | 14 mL test tubes |
| Capacity | 12 tubes | 10 tubes |
| Diameter | Ø12 mm | Ø17 mm |
| Compatible tubes | Falcon 352003 | Falcon 352001 |
| Structure | Rectangular prism | Rectangular prism |
WB-06
- Test tubes
- 5 mL test tubes
- Capacity
- 12 tubes
- Diameter
- Ø12 mm
- Compatible tubes
- Falcon 352003
- Structure
- Rectangular prism
WB-08
- Test tubes
- 14 mL test tubes
- Capacity
- 10 tubes
- Diameter
- Ø17 mm
- Compatible tubes
- Falcon 352001
- Structure
- Rectangular prism
Heated Surfaces
Discover our products in the same category
New
OPT 80
Brings tubes held at 37°C right beside the gynaecological table.
